Earth pit resistance testing record sheet
For any organization electricity is primary requirement to run the machines and equipment, all the machines are used electricity high voltage for those machine need a earthling for the machine if touched with any cable or electric current is pass on body of machine can cause shock to human body & harm internal part of body or burn the skin. This is very critical for the operator to check the machine with tester on each hour on body of machine. To avoid such a accidents machine connect with single wire which second end is in dept of the earth with required material for earth pitting. That is one of the final solutions for it.
Now days, electrical department earth pit are done on the main controls that avoid the leakage of the electrical current to machine’s body. This earth pits are required as per company’s equipments and controls / circuit boards where installed to connect the machine through by.
Nos. of earth pits are increased in organization that difficult to remember of the testing frequently, for the testing every six or one year frequency, electrical department creates the records sheet for the earth pit resistance testing. This work sheet is very useful that all the earth pit resistances testing records are available on required time and same will be indicate the next due for the testing that electrical department easily remember for testing of the earth pit resistance testing.
In the earth pit resistance testing records required information as below:
- Earth pit No.: Each earth pit required a identification number which should be unique for the each earth pit, this identification or earth pit no. will be helpful to identify the locations & information about the board or controls are connected with which line.
- Section : may possible nos. of earth pit are located in single locations that difficult to identify and testing and remember after the six or one year tenure, so section will help for the identify which earth pit is where located.
- Location: off cause location through electrical people can handle all the earth pits that installed as location wise mapping are possible.
- Date of Testing: This is primary requirement for the format, when the earth pit is tested, on base of the next due will be decided.
- Resistance value in ohms: at the time of the testing or at time of the installation of earth pit in the earth, electrical department define the standard measure for the testing. Almost all electrical sufficient value for the measurement is used is ohms that are easier for the measuring for top to bottom level of electrical peoples.
- OK or Not OK: at the movement of the testing of earth pit resistance testing, earth pit is working ok or not are mentioned in this format to remember that this number’s earth pit is not in working conditions as simple.
- Action taken, if not OK: off cause this is easier to under stand requirement if the no ok that what is actions required for this earth pit.
- next due of testing: on base of the date of testing & frequency defined by the electrical head for testing of each earth pit on time frame, date of testing after six month are basically testing done in present organization as stuffiest requirement of the organist ions.
To consider the requirements is very critical to recording of the events and earth pits, here ready made format available for download, earth pit resistance testing records sheets available for download as below:
Download Earth Pit Resistance Testing Record sheet in Excel sheet format
Earth Pit Resistance Testing Record sheet templates download
Earth Pit Resistance Testing Record sheet examples download
Earth Pit Resistance Testing Record sheet sample formats download
Related Topics: